JSP Force®8 Half-Mask – Medium (Mask only)

£9.55 £11.46 Inc VAT

Durable thermoplastic rubber mask for superior fit to most face shapes.

• Daily Face Fit Reassurance
• Passes dolomite
• Protection against construction dust
• Improved hygiene
• Inhalation valve for easy maintenance
• Low profile covers protect filters
• Conforms to EN143

10 in stock (can be backordered)

SKU: BHT003-0L5-000 Categories: , , Tags: , ,

Frequently Bought Together

JSP PressToCheck™ P3 Dust Filters Set of 2
Total: £16.54


JSP Force®8 Half-Mask – Medium (Mask only)

The Force®8 twin cartridge half mask with Typhoon™ valve offers superior low breathing resistance and a 4-point suspension harness with quick-release buckles. The mask is made with a durable thermoplastic rubber offering a superior fit to most face shapes. The mask accepts the full range of low profile Force®8 filters giving the Force®8 the flexibility to be used for many applications, providing filtering protection against particulates, many gases and vapours.


Key Features

  • Conforms to EN 140 & EN 143:200
  • Durable thermoplastic rubber mask for superior fit to most face shapes
  • Fully adjustable 4-point cradle suspension
  • Protection against construction dust
  • Inhalation valve for easy maintenance
  • Passes dolomite
  • Daily Face Fit Reassurance
  • Low resistance exhalation valve for easy breathing, with stable mask configuration

Durable thermoplastic rubber mask for superior fit to most face shapes.

Fully adjustable 4-point cradle suspension ensuring an effective facial fit.

CR2 Reflectivity
Reflective strips create increased visibility in low-light environments for added safety.

Typhoon™ Exhalation Valve
Low resistance exhalation valve for easy breathing, with stable mask configuration.

Force® Filters
Cost effective Force®8 filters available with low profile angle for minimum visual impairment.

Conforms to EN140 (Face piece), EN14387:2004 (Filter performance), EN143:200 (Filter performance)

PressToCheck P3 R D Filters

How can you be sure that you have donned your mask correctly?

With the new patent pending Force®8 PressToCheck™ filters you can instantly check that you have the correct seal every time.

  • FIT IT!
    • Don the Mask – Put the straps and harness over your head and pull the straps to a suitably tight and comfortable fit.
    • PressToCheck™ – Press the front and backs of both filter covers together to stop air from entering through the filters.
    • Inhale – No air should come through the mask. Adjust the mask and repeat until it doesn’t. Release when seal is made.

JSP Force®8 Half-Mask – Medium (Mask only) Specification


Face piece EN140
Filter performance EN14387:2004
Filter performance EN143:200


Width 110mm
Length 195mm
Height 125mm
Weight 82g (Approx.)
Weight (Incl. Filters) 110g – 360g (Approx.)


Type Re-sealable pouch
Material Polyurethene
Width 110mm
Length 195mm
Height 125mm
Weight 140g – 390g (Approx.)


Place the respirator over the mouth and nose, then pull the harness over the crown of the head
Take the bottom straps in both hands, place them at the back of the neck and hook them together
Tighten the top straps first by pulling on ends to achieve a comfortable and secure fit
Tighten bottom straps using either front or rear adjustments (Strap tension may be decreased by pushing out on back side of buckles)
Perform a positive and / or negative pressure fit check


These respirators do not supply oxygen Do not use in oxygen deficient atmospheres
Do not use for respiratory protection against atmospheric contaminants which have poor warning properties, are unknown or immediately dangerous to life and health or against chemicals which generate high heats of reaction with chemical filters
Do not modify or alter this device
The assembled respirator may not provide a satisfactory face seal with certain physical characteristics (such as beards or large side burns) resulting in leakage between the facepiece and the face, the under assumes all risks of bodily injury which may possibly result
Do not use with unknown concentrations of contaminants
Use strictly in accordance with face piece and filter instruction leaflet
Face-fit – Respiratory protection is only effective if it is correctly selected, fitted and worn throughout the time when the wearer is exposed to respiratory contaminants


Cleaning is recommended after each use. Remove the filters
Clean the facepiece (excluding filters) using a cloth moistened with a weak detergent solution and allow to air dry in a noncontainated atmosphere
If filter cartridge is be reused do not remove from respirator but clean with a cloth and warm soapy water and dry with a clean cloth
Respirator components, especially exhalation valve and seat, should be inspected prior to each use. A respirator with any damaged or deteriorated components should be discarded
The cleaned respirator should be stored away from contaminated areas when not in use


Additional information





There are no reviews yet.

Be the first to review “JSP Force®8 Half-Mask – Medium (Mask only)”


How long does JSP pressing filters last?

The shelf life of this mask is 5 years from the manufacturer date if boxed, or 10 years if in new sealed bags out of sunlight. Replacement of these filters is recommended when breathing is not flowing easy.

When should JSP filters be replaced?

When it comes to gas or chemical respirators, it is generally recommended that a worker should dispose of the cartridge filter as soon as it is soiled, damaged, or if he/she experiences breathing difficulty.

GA S  F I L T E R  M O D E L  E N  1 4 3 87

Model Colour Area of application
A Brown Organic gases and vapours, boiling point > 65°C
B Grey Inorganic gases and vapours
E Yellow Acid gases (e.g. sulphur dioxide, hydrochloric acid)
K Green Ammonia
AX Brown Organic vapours boiling point ≤ 65°C
Hg P3 Red-White Mercury

GA S  F I L T E R  C L A S S  E N  1 4 3 87

Class Maximum use level with half mask Series 7000 Maximum use level with full face mask Series 9000
1 1000 ppm (0.1 percent by volume) or 30 x WEL* 1000 ppm (0.1 percent by volume) or 400 x WEL*
2 5000 ppm (0.5 percent by volume) or 30 x WEL* 5000 ppm (0.5 percent by volume) or 400 x WEL*
* WEL = Workplace Exposure Limit whichever is lower

CAUTION: AX filters must only be used once. Low-boiling gases (≤ 65°C) generally bind poorly with gas filters. This may result in shorter periods in service. Please refer to the relevant national regulations for information about the maximum permissible application concentrations and times for the individual compounds. Only use with vapours with good warning properties.
AX filters do not offer adequate protection against various low-boiling gases.

UK Delivery and Ireland Delivery Options Quick View

We have a range of delivery options to suit our customers as we know every customer is unqiue. Below is a list of our standards options but we can always accommodate bespoke needs, simply call us on 03330 150 330.


Next Day

Business Days

From £7.50


2-3 Days

Business Days

From £6.95


13:00 Next Day

Monday to Saturday

From £6.90

DPD 10:30

10:30 Next Day

Business Days

From £25.50




From £23.50


2 Day

Business Days

From £15.00

The Rapid Fire Supplies team is always here to help, if you would like to speak to someone please contact us and we will happily answer your question.