JSP EVO®3 Safety Helmet Slip Ratchet Vented White

£6.50 £6.50 Inc VAT

The EVO®3 Safety Helmet combines a super strong shell for superior all day protection.

  • Conforms to EN 397 industrial helmet standard
  • Industrial safety helmet
  • Tough HDPE shell
  • Precision fit with unique 1-2-3 point harness depth adjustment
  • Slip Ratchet

10 in stock (can be backordered)

SKU: AJF160-000-100 Categories: , , Tags: , ,

Frequently Bought Together

AJF030-000-100 EVO®2 Mid Peak Vented Wht Helmet - Slip Ratchet
+
Sonis® Compact Low Profile Mounted Ear Defenders 31dB SNR
Total: £25.49
Brand:

Description

JSP EVO®3 Safety Helmet Slip Ratchet Vented White

The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8.

Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.

 

Key Features

  • Conforms to EN 397 industrial helmet standard
  • One Touch™ Slip Ratchet version of the EVO2® is so simple to fit that it can be adjusted with just one finger
  • Industrial safety helmet
  • Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested
  • Tough HDPE shell
  • UV Stabilised High Density Polyethylene (HDPE)
  • Precision fit with unique 1-2-3 point harness depth adjustment
  • Slip Ratchet

Tough HDPE shell
In tests the EVO®2 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.

Supreme Comfort
A 6-point polyethylene cradle harness system offers unrivalled comfort without compromising performance.

Chamlon™ Sweatband
Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.

3D Precision Fitting
Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.

Adjustment
OneTouch™ Slip Ratchet.

Universal Slots
Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

Branding
Extra large area for logos on the front, sides, and rear.

Electrical Insulation (Non-vented only)
The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

JSP EVO®3 Safety Helmet Slip Ratchet Vented White Specification

Features 

EN STANDARD EN397 Yes
PERFORMANCE Impact Resistance Yes 50 Joules
TEMPERATURE

RESISTANCE

– 40c Yes
SHELL
MATERIAL
HDPE
Recyclable
UV Stabilised
Yes
Yes
Yes
HARNESS
MATERIAL
HDPE
LDPE & Textile
Yes
Yes
OPTIONS Universal Accessories(30mm slots)
Reflective labels of optional class 2
Full EVOSPEC glasses
Yes
Yes
Yes – EN166.1.F.T.N
HARNESS SYSTEM
OPTIONS
JSP 3D
Slip Ratchet
6 pts
Yes
Yes
Yes
CHINSTRAP 4 pts Yes
LOGO
OPTIONS
Front
Rear
Side
MOQ Logo
Individual Name
Yes
Yes
Yes
10
Yes
[/su_column][/su_row]

 

JSP EVO®3 Safety Helmet Slip Ratchet Vented White Specification

CONFORMITY

Conforms to EN397 & ГOCT P 50460-92 Meets optional Molten Metal requirement
EU Type Examination Certificate Number 676976 Low dome profile
Compatible with other JSP safety products Company personalisation available by printing

PRODUCT DIMENSIONS

Size 530 – 640mm
Weight 350g (Approx.)

INSTRUCTIONS FOR USE

Place the respirator over the mouth and nose, then pull the harness over the crown of the head
Take the bottom straps in both hands, place them at the back of the neck and hook them together
Tighten the top straps first by pulling on ends to achieve a comfortable and secure fit
Tighten bottom straps using either front or rear adjustments (Strap tension may be decreased by pushing out on back side of buckles)
Perform a positive and / or negative pressure fit check

LIMITATIONS OF USE

Protection will only be offered if the helmet is fitted correctly
Any helmet subjected to severe impact should be replaced immediately. Do not apply paint, solvents or adhesive labels except in accordance with instructions from the manufacturer
The harness, when in contact with the skin may cause allergic reactions to susceptible individuals. If this occurs leave the hazard area, remove the helmet and seek medical advice
The attention of users is also drawn to the dangers of modifying or removing any of the original component parts, other than as recommended by the manufacturer

CLEANING AND MAINTENANCE

The unit may be cleaned with soap and warm water and dried with a soft cloth
The helmet should not be cleaned with chemical or abrasive cleaners
The helmet should be stored out of direct sunlight
The helmet should be stored away from chemicals and extremes of temperature

 

Additional information

Brand

Manufacturer

Size

Colour

Reviews

There are no reviews yet.

Be the first to review “JSP EVO®3 Safety Helmet Slip Ratchet Vented White”

Protective boots and helmets for industrial use

2.1 Protective boots and helmets that qualify for zero rating

They are zero-rated when all the following conditions are met:

Condition Description Further information
1 The articles must be boots or helmets paragraph 2.2
2 They must be manufactured to satisfy the requirements of regulation 8(2) of the Personal Protective Equipment Regulations 2002 paragraphs 2.3 to 2.5
3 They must bear a mark indicating conformity with regulation (8)(2) of the Personal Protective Equipment Regulations 2002 paragraphs 2.3 to 2.5
4 They must be for industrial use paragraph 2.4
5 They must not be supplied to persons for use by their employees paragraph 2.5

Paragraph 2.6 explains when accessories are zero-rated.

2.2 Difference between a shoe and a boot

The zero rate applies specifically to protective boots and therefore protective shoes are not eligible for zero-rating, even if they meet the remaining requirements.

2.3 Regulatory standards for protective boots and helmets

The protective boots and helmets must be manufactured to the standards which satisfy the requirements of regulation 8(2) of the Personal Protective Equipment Regulations 2002.

2.4 Meaning of ‘industrial use’

This has its ordinary and everyday meaning. Boots and helmets that meet all the other conditions for zero rating but are not for industrial use, such as motorcycle boots, are standard-rated.

2.5 Work out who is being supplied

You cannot zero rate supplies of protective boots or helmets to an employer for the use by their employees. Supplies from a manufacturer to a wholesaler who in turn supplies them to a retailer can be zero-rated subject to the conditions set out earlier in this notice. Supplies from an employer to an employee can also be zero-rated, subject to the conditions set out earlier in this notice.

UK Delivery and Ireland Delivery Options Quick View

We have a range of delivery options to suit our customers as we know every customer is unqiue. Below is a list of our standards options but we can always accommodate bespoke needs, simply call us on 03330 150 330.

DPD

Next Day

Business Days

From £7.50

Economy

2-3 Days

Business Days

From £6.95

RMG

13:00 Next Day

Monday to Saturday

From £6.90

DPD 10:30

10:30 Next Day

Business Days

From £25.50

Saturday

SAT Day

Saturday

From £23.50

Ireland

2 Day

Business Days

From £15.00

The Rapid Fire Supplies team is always here to help, if you would like to speak to someone please contact us and we will happily answer your question.